Wander Control Systems, Inc | Home of the Forever Tag

Platinum 3 High Traffic Door Controllers

The Platinum 3 Series High-Traffic Door Controller from Wander Control Systems is available in two sizes: Platinum 3 - Small; Platinum 3B - Big.

Click links to view and print:

Platinum 3 Overview Brochure

Platinum 3 Installation Manual

Platinum 3 Programming Guide

The Platinum 3 is the same size as our Sentry Low-Traffic Door Controller. The larger Platinum 3B has more room for wire and relay connections. All operating features in both the Platinum 3 and the Platinum 3B are identical

Platinum 3 has an LCD display which shows the time, door status, RF Tag identification number detected, and other important data in a clear concise manner. Platinum 3 can be used in conjunction with electromagnetic door locks (known as maglocks), with motorized automatic doors, and with elevators for additional security.

Platinum 3 has two operating modes. The controller can be programmed to change from one mode to the other at specific times or can be programmed to stay in the same mode as long as is desired for your security needs.

WANDER MODE ~ If the door is opened while in Wander Mode with a person wearing a wrist or ankle wander tag detected, the controller will activate an audible alarm to notify personnel of the potential problem. Wander Mode is normally used during the high-traffic time periods of a normal work day. If no tag is present, the door functions normally with no alarm notification.

PERIMETER MODE ~ If the door is opened while in Perimeter Mode, the controller will activate an audible alarm to notify personnel of the security breach. Perimeter Mode is often used overnight after normal visiting hours or at exits that need more stringent security.

An escort code can be entered either on the built-in keypad of the controller or on additional remote keypads installed on the opposing side of the doorway. The escort code disables the door controller alarm for a short period of time to allow authorized ingress and egress with no alarm sound or notification. Platinum 3 is shipped from the factory with security features set to ‘STANDARD’ which allows only employee access and control. The system can be set to ‘ENHANCED’ which allows employee plus limited friends & family access and control.

An optional nurse station or security station panel is available which will sound an audible alarm and display a visual alert when a door is in alarm condition. However, an authorized staff member must visually inspect the monitored area and turn off the alarm at the door controller. Platinum 3 can be integrated with most pagers, nurse call systems, and many data reporting systems for more sophisticated applications.

Wander Control Systems equipment runs on low voltage – 12 Volts DC.

The Platinum 3 and Platinum 3B are completely MADE IN AMERICA. Each has a sturdy faceplate, keypad and back box made out of high quality metal for pleasant aesthetics and many years of durable service.

The Platinum 3B has more room for wire and relay connections than does the smaller Platinum 3. All operating features in both the Platinum 3 and the Platinum 3B are identical.

Click links to view and print:

Platinum 3B Overview Brochure

Platinum 3B Installation Manual

Platinum 3B Programming Guide

Additional information can be found on the Product Documentation page in the Customer Support section.